-40%
FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1
FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1
FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1
FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1
FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1
FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1

FT8, FT4, JT65, PSK31, RTTY, VoIP, APRS, PC-CW Ham Radio Interface HAMSTIR DX-R1

$ 55.44

  • Band: FM, HF, UHF, VHF
  • Brand: OneChipDesign
  • Compatible Brand: For Icom, For Kenwood, For Yaesu
  • Connectivity: USB
  • To Fit: Ham Radio Transceiver, Walkie Talkie
  • Type: Cables & Adaptors

Description

Digital communicating interface for FT8, FT4, JT65, PSK31, VoIP, APRS, SSTV etc.. Also CW operation by PC typing are available. No additional cables are required. HAMSTIR DX-R1 has full-optical circuit between rig and PC. (no transformer used) This is good for high output power operation for HF band user mainly. 500W stations are using too in Japan. When you order this product before or after, please let us know your rig name by ebay message. This is to meet the cable plug with your rig terminal. The various plugs are prepared. (e.g. MiniDIN 6P/10P, DIN 8P/13P, RCA PIN, 3.5/2.5 plug etc.) For the change of your rig in the future, most can be accommodated with optional conversion cable (for a fee). Programs and Operating Modes) WSJT-X (FT8, JT65 etc.), JTDX (FT8), MMVARI (PSK31, RTTY), MMTTY (RTTY), MMSSTV (SSTV), HAM Delux, Ctestwin (CW-TX), Digital Sound CW (CW-TRX), VoIP(EchoLink, AllstarLink etc.), AGWPE+UI-View32 (APRS) HAMSTIR DX-R1 needs additional power supply for optical circuit (current : 10mA). There are below two ways and it depends on your transceiver. This will be informed you before wiring. 1. Take external power supply for rig 13.8V etc.. This is better for plural rigs operating. 2. Rig Rear, take +5 to 13V pin assigned in PIN/ DIN ACC etc. Jack * simple is best! English manual are included. This also includes driver installation and WSJT-X basic configuration. The other language may be possible. Will be shipped by postal registered small package (trackable). Specifications ) 1. USB built-in : USB2.0 Full Speed (FTDI chip) 2. Sound chip built-in : "USB PnP Sound Device" 3. Power Supply : +5.0V +/-0.5 --- USB Bus Power (ext. supply for optical circuit) 4. Current Consumption : approx. 250mA --- USB Bus Power 5. Input Level : 1.0Vrms max/ 10K ohms --- Adjustable by SFR 6. Output Level : 0.4Vrms/ 600 ohms --- Adjustable by SFR 7. PTT Driving : Open-Drain --- Sink current less 1A. 8. PTT Selection : RTS/ DTR (Default= RTS) 9. Temperature Ambient : 0 deg.C - 70 deg.C --- IC Spec. followed 10. Cabinet Dimension : W82 - D130 - H24mm --- Materials : Case=Alminum,, Panel=ABS 11. Weight : approx. 250g --- with Cables 12. Accessories : User Manual, Soft Case * VCCI, FCC, EN Compliance are not confirmed, but, designing considered. * RoHS Directive : Pb free is not used on components soldering. * If you want more detail products information, visit site "OneChipDesign". * Products are not by mass-production, but hand-made.