Description

Kenwood TS-930S Power Supply Capacitor Kit This is a complete electrolytic capacitor replacement kit for the power supplies of the Kenwood TS-930S. Electrolytic capacitors have a design life span and deteriorate with age,usage, and heat or a combination of all three. I have been running into more and more power supply related problems as the 930 ages. The power supply of the 930 has two massive 22000uf 50V caps filtering the +28V line, and a PSU board. This kit includes all electrolytic capacitors used in these supplies, and three capacitors have been upgraded to 105 deg. C. Replacing these capacitors now will not only prevent failure in the future, but also reduces the possibility of a component failure taking out rectifiers or even a power transformer. Technical Notes: ** Included in the kit is an installation guide. In the case of the TS-930S, replacing the power supply filter capacitors is a relatively simple task for the hobbyist. ** There is no re-tuning of the radio required as the capacitors being changed are power supply related. ** Installation Time is approximately 4 hours from start to finish for an experienced technician . For all others, take you time and enjoy. Its a great project! The kit is comprised of 8 capacitors in all 10uf 25V - Qty 1 100uf 25V - Qty 1 22uf 25V - Qty 1 2200uf 35V - Qty 1 (105 deg. C) 2200uf 50V - Qty 2 (105 deg. C) 22000uf 50V - Qty 2 The capacitor kit shown in the photo is generic in nature as I have a wide variety of kits for Icom, Kenwood and Yaesu. Capacitors used in the kit are brand new Nichicon/Panasonic/CDE