Description

Tripp Lite N784-H01-STMM Transceiver/Media Converter Tripp Lite N784-H01-STMM Transceiver/Media Converter International Customers: All electronic products are packaged for sale in the US with US voltage. Package Contents: N784-H01-STMM Transceiver/Media Converter L-shaped Bracket Rubber Foot ST Connector Cap External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A) DIN Rail Kit Wall-mounting Hardware Quick Start Guide TAA Compliant: Yes Environmentally Friendly: Yes Environmental Compliance: Restriction of Hazardous Substances (RoHS) Waste Electrical and Electronic Equipment Directive (WEEE) Country of Origin: Taiwan Product Description This item is brand-new, factory sealed. Tripp Lite Network Copper Ethernet to Fiber ST Multimode Extender Media Converter, RJ45 to ST Duplex, 10/100 Mbps, Extend up to 1.2 Miles / 2 Kilometers, 2-Year Manufacturer's Warranty (N784-H01-STMM) EXTENDS NETWORK CONNECTION OVER FIBER OPTIC CABLE: Extends a 10/100 Mbps Ethernet network connection over ST duplex multimode fiber optic cable up to 2 kilometers. Automatic MDI/MDI-X configuration connects devices without crossover cabling. MONITOR YOUR INSTALLATION: LEDs indicate Ethernet connection and various statuses, including data transfer speed. Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. BUILT TO WITHSTAND A VARIETY OF HAZARDS: Operating temperature range of -10 to 60C or 14 to 140F. Protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Wall & DIN mounting hardware included. COMPLIANT PRODUCTS FOR GOVERNMENT BUSINESSES: Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email. Brand: ?Tripp Lite Item Weight: ?1.32 pounds Package Dimensions: ?9.17 x 7.2 x 2.44 inches Manufacturer: ?TRIPP LITE EXTENDS A NETWORK CONNECTION UP TO 2 KM OVER ST MULTIMODE FIBER OPTIC CABLE: This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-STMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. MONITOR YOUR INSTALLATION WITH LINK FAULT SIGNALING AND LOOP BACK FUNCTIONS: Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDS INDICATE INSTALLATION PERFORMANCE AND DIAGNOSTIC FUNCTIONS: Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. PROTECTIVE METAL HOUSING BUILT TO WITHSTAND A VARIETY OF HAZARDS: The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. WORKS IN TANDEM WITH TRIPP LITE'S N785-CH12 CHASSIS: House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-COMPLIANT FOR GSA SCHEDULE PURCHASES: The N784-H01-STMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Package Contents: N784-H01-STMM Transceiver/Media Converter L-shaped Bracket Rubber Foot ST Connector Cap External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A) DIN Rail Kit Wall-mounting Hardware Quick Start Guide Specification Power Description Plug/Connector Type NEMA 1-15P Power Source AC Adapter Power Consumption 1.80 W Physical Characteristics Form Factor Wall Mountable DIN Rail Mountable Desktop Weight (Approximate) 8.43 oz Height 0.9" Width 2.9" Depth 4.3" Warranty Limited Warranty 2 Year Interfaces/Ports ST Port Type Duplex Network (RJ-45) Yes Total Number of Ports 2 Number of Network (RJ-45) Ports 1 Number of ST Ports 1 General Information Brand Name Tripp Lite by Eaton Marketing Information Features | Extends a Network Connection up to 2 km over ST Multimode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-STMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 Chassis House and power up to 12 Tripp Lite media converters, including the N784-H01-STMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule Purchases The N784-H01-STMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Product Type Transceiver/Media Converter Product Name N784-H01-STMM Transceiver/Media Converter Manufacturer Tripp Lite by Eaton Manufacturer Part Number N784-H01-STMM Product Model N784-H01-STMM Media & Performance Maximum Distance Supported 2 km Media Type Supported Twisted Pair Optical Fiber Fiber Mode Supported Multi-mode Fiber Optic Cable Wavelength 0.1 mil Title Product Title Tripp Lite by Eaton Hardened Copper to Fiber Media Converter - 10/100 Mbps, RJ45/ST Multimode, -10° to 60°C, 2 km [1.2 mi.], TAA (N784H01STMM) Network & Communication Ethernet Technology Fast Ethernet Network Technology 10/100Base-TX 100Base-FX Shipping Most orders placed prior to 11AM PST ship same business day Some lightweight items ship Postal and can be shipped to a PO BOX. Most other orders will ship via UPS or FedEx. Please note we cannot ship UPS or FedEx to PO Box addresses. Expedited orders will ship 2nd Day Air Returns This item is eligible for return within 30 days of delivery. Opened items must be in re-sellable condition including original packaging and all accessories. Please visit our Returns Page for more information on Excluded Items, Damage Claims, and more details on requesting RA information. [ Read our full policy ] About Beach Audio Founded in August 2002, Beach Audio´s mission is to provide the best experience on the Internet for buying Consumer Electronics. We focus on making purchasing online a pleasant experience. We offer flat rate Ground shipping on all items less than 75 pounds that can be shipped via common carrier. Our sales office is located in beautiful town of Redondo Beach, California, just a few miles South of Los Angeles International Airport. We do not stock any inventory at our sales office. Instead, we ship from several warehouses located throughout the country. Our sophisticated fulfillment system will automatically ship from the warehouse location that is closest to your shipping address! Why are our prices so low? It´s simple. We have modeled our business much like a wholesaler. We sell in huge volume and have streamlined our operations to provide you with the best combination of price and service available anywhere. Hours of Operation 8AM - 5PM PST MON - THU, 8AM - NOON PST FRIDAY [ Read more ] Copyright© Beach Audio Inc, 2022