Description
This was used for an old CB Radio that had a 120 vac and a 12DC Adapter for stationary or mobile use, the Radio is missing. The viberator/chopper was inoperable and not design to be serviced. Having nothing to loose the crimp was opened. The heavy duty contacts show little sign of use but were badly oxidized. Careful use of fine sandpaper restored it to full function. The crimp is mangled and the base is a little loose but the power supply works great. The no load voltage is about 200vac at 100 ma it dropped to 175vac and 150vac at 285ma, probably not designed for more than 100 ma or so, the 12volt amps at 150 volts was 4amps. Jumper on jack is bypass for external switch.